Copier Features Settings - Ricoh BBP-PRSP213NW1 Manual

7. Configuring the Machine Using the Control Panel

Copier Features Settings

MF
Select Paper Tray
Select the paper tray used for copying.
Default: [Tray 1]
• Tray 1
• Bypass Tray
Sort
Configures the machine to sort the output pages into sets when making multiple copies of a multi-
page document (P1, P2, P1, P2...).
Default: [Off]
• On
• Off
Original Type
Specifies the content of originals, to optimize copy quality.
Default: [Mixed]
• Mixed
Select this when the original contains both text and photographs or pictures.
• Text
Select this when the original contains only text and no photographs or pictures.
• Photo
Select this when the original contains photographs or pictures. Use this mode for the following
types of original:
• Photographs
• Pages that are entirely or mainly photographs or pictures, such as magazine pages.
• Vou.
Select this to scan with the appropriate setting for vouchers. This is available only if using the
exposure glass.
Density
Specifies the image density for photocopying.
Increase the level (black squares) to increase the density.
Default: The default setting is the middle of 5 adjustment levels.
Reduce/Enlarge
Specifies the percentage by which copies are enlarged or reduced.
132
opal-p2_mf2_com_user_guide_00142120_eng.xml
Draft 2014/01/07