Chrysler Concorde 2004 Service Manual page 507

*ALL DOORS FAILING TO LOCK AND UNLOCK FROM ONE SWITCH —
Continued
TEST
10 Disconnect the inoperative Power Door Lock Switch connector.
Connect a jumper wire between the Door Switch Mux circuit and Fused B(+).
With the DRBIII , read the Door Lock Sw Volts status.
Is the voltage above 9.0 volts?
Yes → Replace the Power Door Lock Switch.
→ Go To 11
No
11 If there are no possible causes remaining, view repair.
Repair
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
491
APPLICABILITY
All
All