*COURTESY LAMPS STAY ON AT ALL TIMES —
TEST
8
Turn the ignition off.
Disconnect the Body Control Module C4 connector.
Ensure the Driver Door Lock Motor/Ajar Switch is connected.
Ensure the door latch is in the latched position during this test.
Measure the resistance of the Driver Door Ajar Switch Sense circuit in the Body
Control Module C4 connector to ground.
Is the resistance below 5.0 ohms?
Yes → Replace the Driver Door Lock Motor/Ajar Switch.
→ Replace the Body Control Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
INTERIOR LIGHTING
Continued
401
APPLICABILITY
All