Chrysler Concorde 2004 Service Manual page 888

DRIVEABILITY - NGC
P0563-BATTERY VOLTAGE HIGH —
TEST
3 Turn the ignition off.
Disconnect the Generator Field harness connector.
Disconnect the PCM harness connector.
Measure the voltage on the (K20) Gen Field Control circuit at the Generator Field
harness connector.
Is the voltage above 1.0 volt?
Yes → Repair the short to voltage in the (K20) Gen Field Control circuit.
→ Go To 4
No
4 NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage or terminal push out. Repair as necessary.
If there are no possible causes remaining, view repair.
Repair
ACTION
Perform POWERTRAIN VERIFICATION TEST VER - 3 - NGC.
Replace and program the Powertrain Control Module in accor-
dance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 3 - NGC.
Continued
230
APPLICABILITY
All
All