Chrysler Concorde 2004 Service Manual page 530

SPEED PRO STEERING
SPEED PRO STEERING SOLENOID CKT OPEN/SHORTED TO GROUND
—
Continued
TEST
7 Turn the ignition off.
Disconnect the Speed Pro Steering Solenoid harness connector.
Remove the Body Control Module from the Junction Block.
Measure the resistance of the Speed Pro Steering Solenoid (+) circuit between the
Junction Block BCM connector and the Speed Pro Steering Solenoid connector.
Is the resistance below 5.0 ohms?
Yes → Go To 8
→ Repair the open Speed Pro Steering Solenoid (+) circuit.
No
8 If there are no possible causes remaining, view repair.
Repair
ACTION
Perform SPEED PRO STEERING VERIFICATION TEST - VER
1.
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
514
APPLICABILITY
All
All