Chrysler Concorde 2004 Service Manual page 796

DRIVEABILITY - NGC
Symptom:
P0335-CRANKSHAFT POSITION SENSOR CIRCUIT
When Monitored and Set Condition:
P0335-CRANKSHAFT POSITION SENSOR CIRCUIT
When Monitored: Engine cranking.
Set Condition: No CKP signal is present during engine cranking, and at least 8 camshaft
position sensor signals have occurred.
CHECKING INTERMITTENT CMP SIGNAL WITH LAB
INTERMITTENT CKP SIGNAL
(K6) 5 VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(K6) 5 VOLT SUPPLY CIRCUIT OPEN
(K6) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
(K24) CKP SIGNAL CIRCUIT SHORTED GROUND
(K24) CKP SIGNAL CIRCUIT OPEN
(K24) CKP SIGNAL CIRCUIT SHORTED TO VOLTAGE
(K24) CKP SIGNAL SHORTED TO (K6) 5 VOLT SUPPLY CIRCUIT
(K4) SENSOR GROUND CIRCUIT OPEN
PCM - (K6) 5 VOLT SUPPLY
PCM - (K24) CKP SIGNAL
CRANKSHAFT POSITION SENSOR
TEST
1 Start the engine.
With the DRBIII , read the CKP SYNC State.
Does the DRBIII display CKP SYNC state IN SYNC?
Yes → Go To 2
→ Go To 4
No
POSSIBLE CAUSES
ACTION
138
APPLICABILITY
All