*ATC TEMPERATURE CONTROL INCORRECT IN SUN OR SHADE —
Continued
TEST
5
Disconnect the Sun Sensor/VTSS LED harness connector.
Disconnect the Body Control Module C2 harness connectors.
Measure the resistance of the Sun Sensor Signal circuit between the BCM C2
connector and the sensor connector.
Is the resistance below 5.0 ohms?
Yes → Go To 6
→ Repair the Sun Sensor Signal circuit for an open.
No
6
If there are no possible causes remaining, view repair.
Repair
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1.
333
HEATING & A/C
APPLICABILITY
All
All