Symptom:
*PASSENGER
EQUIPPED)
PASSENGER MIRROR LEFT DRIVER CIRCUIT OPEN
PASSENGER MIRROR SENSOR GROUND WIRE OPEN
PASSENGER MIRROR-COMMON DRIVER CIRCUIT OPEN
PASSENGER MIRROR-UP DRIVER CIRCUIT OPEN
MEMORY HEATED SEAT MIRROR MODULE
MEMORY HEATED SEAT MIRROR MODULE- SENSOR GROUND
TEST
1
Note: If the seat is unbolted for testing, connect a jumper wire from the seat
frame to a known good ground.
Turn the ignition off.
Disconnect memory heated seat mirror module harness connector C2.
Turn the ignition on.
While pressing the passenger mirror switch to the left position, measure the voltage
of the passenger mirror left driver circuit in memory heated seat mirror module
connector C2.
Is the voltage above 10.0 volts when the switch is pressed?
Yes → Go To 2
→ Repair the passenger mirror left driver circuit for an open.
No
2
Note: If the seat is unbolted for testing, connect a jumper wire from the seat
frame to a known good ground.
Turn the ignition off.
Disconnect memory heated seat mirror module harness connector C2.
Turn the ignition on.
While pressing the passenger mirror switch to the down position, measure the
voltage of the passenger mirror common driver circuit in memory heated seat mirror
module connector C2.
Is the voltage above 10.0 volts when the switch is pressed?
Yes → Go To 3
→ Repair the passenger mirror common driver circuit for an open.
No
MIRROR
INOPERATIVE
POSSIBLE CAUSES
ACTION
Perform MEMORY HEATED SYSTEM VERIFICATION TEST -
VER 1.
Perform MEMORY HEATED SYSTEM VERIFICATION TEST -
VER 1.
FROM
459
MEMORY SEAT
MEMORY
(IF
APPLICABILITY
All
All