Chrysler Concorde 2004 Service Manual page 364

INSTRUMENT CLUSTER
BCM - DIMMING LEVEL SWITCH FAILURE —
TEST
11 Turn the ignition off.
Disconnect the Headlamp Switch harness connector.
Turn the ignition on.
Measure the voltage of the Panel Lamp Dimmer Signal circuit.
Is the voltage above 10.0 volts?
Yes → Replace the Headlamp Switch.
→ Replace and program the BCM in accordance with the Service
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
Continued
348
APPLICABILITY
All