Chrysler Concorde 2004 Service Manual page 331

Hide thumbs Also See for Concorde 2004:

Table of Contents

MODE DOOR STALL TEST FAILURE —

Disconnect the Body Control Module C2 harness connector.

Turn the ignition on.

Measure the voltage of the 5 volt supply circuit.

Is there any voltage present?

Yes → Repair the 5 volt supply circuit for a short to voltage.

→ Replace the Body Control Module.

Calibration must be performed after repair/replacement is com-

Perform BODY VERIFICATION TEST - VER 1.

Calibration must be performed after repair/replacement is com-

Perform BODY VERIFICATION TEST - VER 1.

HEATING & A/C

APPLICABILITY

Chapters

Table of Contents

300m 2004 Intrepid 2004