Deleting An Autonomous System Path; Deleting An Autonomous System Path Filter Entry; Managing Neighbors - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• action is the action.
• match is the regular expression to match with the autonomous system path. For more information about
regular expressions, refer to
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.19.6.5

Deleting an Autonomous System Path

To delete an autonomous system path filter for dynamic BGP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
no routing bgp filter as-path name
Where:
• name is the name of the autonomous system path filter
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.19.6.6

Deleting an Autonomous System Path Filter Entry

To delete an entry for an autonomous system path filter, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
no routing bgp filter as-path name entry action match
Where:
• name is the name of the autonomous system path filter.
• action is the action.
• match is the regular expression to match with the autonomous system path. For more information about
regular expressions, refer to
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.19.7

Managing Neighbors

Neighbors are other routers with which to exchange routes. One or more neighbors must be specified in order for
BGP to operate.
NOTE
If neighbors are specified but no networks are specified, the router will receive BGP routing information
from its neighbors but will not advertise any routes to them. For more information about networks, refer
to Section 5.19.8, "Managing
Deleting an Autonomous System Path
Section 2.6.6, "Using Regular
Section 2.6.6, "Using Regular
Networks".
Expressions".
Expressions".
Chapter 5
Setup and Configuration
329