Enabling/Disabling Ruggedcom Elan - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
no apps eLAN certificate ca-cert-list name
Where:
• name is the name of the CA (Certified Authority) certificate.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.43.5

Enabling/Disabling RUGGEDCOM ELAN

NOTE
Certificates must be configured before RUGGEDCOM ELAN is enabled. For more information, refer to
Section 5.29.3, "Configuring Certificates and
To enable or disable communication with an RUGGEDCOM ELAN system, do the following:
1. Make sure the CLI is in Configuration mode.
2. Enable communication by typing:
apps elan enabled
Or disable communication by using the no version of the command:
no apps elan enabled
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Enabling/Disabling RUGGEDCOM ELAN
Keys".
Chapter 5
Setup and Configuration
621