Table of Contents
Advertisement
RUGGEDCOM ROX II
CLI User Guide
Parameter
failrelay-enable
led-enable
auto-clear
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 4.7
Managing Certificates and Keys
The following sections describe how to configure and manage certificates and keys on the device:
NOTE
Only admin users can read/write certificates and keys on the device.
•
Section 4.7.1, "Managing CA Certificates and CRLs"
•
Section 4.7.2, "Managing Private Keys"
•
Section 4.7.3, "Managing Public Keys"
•
Section 4.7.4, "Managing Certificates"
Section 4.7.1
Managing CA Certificates and CRLs
The following sections describe how to configure and manage CA certificates and their associated Certificate
Revocation Lists (CRLs) on the device:
•
Section 4.7.1.1, "Viewing a List of CA Certificates and CRLs"
•
Section 4.7.1.2, "Viewing the Status of a CA Certificate and CRL"
•
Section 4.7.1.3, "Adding a CA Certificate and CRL"
•
Section 4.7.1.4, "Deleting a CA Certificate and CRL"
Managing Certificates and Keys
Description
If disabled, the alarm is not reported in the active list and does
not actuate LED/failrelay.
Synopsis: typeless
If enabled, this alarm will assert the failrelay.
Synopsis: typeless
If enabled, the main 'Alarm' LED light will be red when this alarm
is asserted. If disabled, the main 'Alarm' LED light is not affected
by this alarm.
Synopsis: typeless
If enabled, the LED and failrelay will be cleared automatically
when condition is met.
Chapter 4
System Administration
165
Advertisement
Table of Contents
Troubleshooting
