Siemens RUGGEDCOM ROX II User Manual page 242

Chapter 5
Setup and Configuration
Table: SNMP Traps
Standard
RFC 3418
RFC 4188
IEEE Std 802.1AB-2005
RFC 1229, 2863, 2233,
1573
RuggedCom
204
MIB Trap and Description
authenticationFailure
SNMPv2-MIB
An authenticationFailure trap signifies that the SNMP entity has
received a protocol message that is not properly authenticated. While all
implementations of SNMP entities MAY be capable of generating this trap, the
snmpEnableAuthenTraps object indicates whether this trap will be generated.
coldStart
A coldStart trap signifies that the SNMP entity, supporting a notification originator
application, is reinitializing itself and that its configuration may have been altered.
warmStart
A warmStart trap signifies that the SNMP entity, supporting a notification originator
application, is reinitializing itself such that its configuration is unaltered.
BRIDGE-MIB newRoot
The newRoot trap indicates that the sending agent has become the new root of the
Spanning Tree. The trap is sent by a bridge soon after its election as the new root
(e.g. upon expiration of the Topology Change Timer) immediately subsequent to its
election. Implementation of this trap is optional.
topologyChange
A topologyChange trap is sent by a bridge when any of its configured ports
transitions from the Learning state to the Forwarding state, or from the Forwarding
state to the Blocking state. The trap is not sent if a newRoot trap is sent for the
same transition. Implementation of this trap is optional.
lldpRemTablesChange
LLDP-MIB
An lldpRemTablesChange notification is sent when the value of
lldpStatsRemTableLastChangeTime changes. It can be utilized by a Network
Management System (NMS) to trigger LLDP remote systems table maintenance
polls. Note that transmission of lldpRemTablesChange notifications are throttled by
the agent, as specified by the lldpNotificationInterval object.
linkUp
IF-MIB
A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected
that the ifOperStatus object for one of its communication links left the down state
and transitioned into some other state (but not into the notPresent state). This
other state is indicated by the included value of ifOperStatus.
linkDown
A linkDown trap signifies that the SNMP entity, acting in an agent role, has
detected that the ifOperStatus object for one of its communication links is about
to enter the down state from some other state (but not from the notPresent state).
This other state is indicated by the included value of ifOperStatus.
trapGenericTrap
RUGGEDCOM-TRAPS-
MIB The main subtree for RUGGEDCOM generic traps. Used for User Authentication
Events only.
trapPowerSupplyTrap
The main subtree for the RUGGEDCOM power supply trap.
trapSwUpgradeTrap
The main subtree for the RUGGEDCOM software upgrade trap.
trapCfgChangeTrap
The main subtree for the RUGGEDCOM configuration change trap.
trapFanBankTrap
The main subtree for the RUGGEDCOM fan bank trap.
trapHotswapModuleStateChangeTrap
The main subtree for the RUGGEDCOM fan hot-swap module state change trap.
RUGGEDCOM ROX II
CLI User Guide
MIB Files and SNMP Traps