Configuring The Hostname; Customizing The Welcome Screen; Setting The User Authentication Mode - Siemens RUGGEDCOM ROX II User Manual

Chapter 4
System Administration
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.2

Configuring the Hostname

To configure the host name for the device, do the following:
1. Make sure the CLI is in Configuration mode.
Navigate to admin » hostname and configure the following parameter(s) as required:
2.
Parameter
name { name }
domain { domain }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.3

Customizing the Welcome Screen

A custom welcome message for both the Web and CLI interfaces can be displayed at the login prompt.
To add a welcome message, do the following:
admin authentication banner message
Where:
• message is the custom welcome message
Section 4.4

Setting the User Authentication Mode

The user authentication mode controls whether user log in attempts are authenticated locally or by a RADIUS
server.
To set the authentication mode, type:
admin authentication mode [ localonly | radius_local | radius_then_local ]
• If localonly is selected, users will be authenticated locally, regardless of whether or not a RADIUS server has
been configured.
• If radius_local is selected, users will be authenticated against the configured RADIUS server. If the RADIUS
server is unreachable, users will be authenticated locally.
160
Description
Synopsis: A string 1 to 63 characters long
Default: ruggedcom
The hostname that is the name of this device.
Synopsis: A string
Default: localdomain
The domain for this hostname.
RUGGEDCOM ROX II
CLI User Guide
Configuring the Hostname