Table of Contents
Advertisement
Chapter 3
Device Management
Parameter
on-demand
alias { alias }
4.
Configure the LLDP settings by configuring the following parameter(s):
Parameter
admin-status { admin-status }
notify
5.
Add a VLAN ID (VID) for the port. For more information, refer to
Routable Ethernet
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 3.19
Managing Serial Ports
The following sections describe how to configure and manage serial ports:
•
Section 3.19.1, "Viewing a List of Serial Ports"
•
Section 3.19.2, "Viewing Serial Port Statistics"
•
Section 3.19.3, "Viewing Transport Connection Statistics"
•
Section 3.19.4, "Viewing DNP Device Table Statistics"
•
Section 3.19.5, "Clearing Serial Port Statistics"
•
Section 3.19.6, "Configuring a Serial Port"
•
Section 3.19.7, "Restarting the Serial Server"
•
Section 3.19.8, "Resetting a Serial Port"
106
Port".
Description
Enables/Disables whether the port will respond to ARP requests
for hosts other than itself.
Synopsis: typeless
This interface is up or down on demand of link fail over.
Synopsis: A string 1 to 64 characters long
The SNMP alias name of the interface
Description
Synopsis: { tx-only, rx-only, rx-tx, no-lldp }
Default: rx-tx
<itemizedlist><listitem>no-lldp : The local LLDP agent can neither
transmit nor receive LLDP frames.</listitem> <listitem>rxTx :
The local LLDP agent can both transmit and receive LLDP
frames through the port.</listitem> <listitem>txOnly : The
local LLDP agent can only transmit LLDP frames.</listitem>
<listitem>rxOnly : The local LLDP agent can only receive LLDP
frames.</listitem></itemizedlist>
Synopsis: typeless
Disabling notifications will prevent sending notifications and
generating alarms for a particular interface from the LLDP agent.
Section 5.37.8.3, "Adding a VLAN to a
RUGGEDCOM ROX II
CLI User Guide
Managing Serial Ports
Advertisement
Table of Contents
Troubleshooting
