Related Documents; System Requirements; Accessing Documentation - Siemens RUGGEDCOM ROX II User Manual

Preface
Example
command
command parameter
command parameter1 parameter2
command parameter1 parameter2
command [ parameter1 | parameter2 ]
command { parameter3 | parameter4 }
command parameter1 parameter2 { parameter3 |
parameter4 }

Related Documents

Other documents that may be of interest include:
• RUGGEDCOM RX1500 Installation Guide
• RUGGEDCOM RX1500 Data Sheet

System Requirements

Each workstation used to connect to the RUGGEDCOM ROX II Rugged CLI interface must meet the following
system requirements:
• Must have a working Ethernet interface compatible with at least one of the port types on the RUGGEDCOM
RX1500
• The ability to configure an IP address and netmask on the computer's Ethernet interface
• A suitable Ethernet cable
• An SSH client application installed on a computer

Accessing Documentation

The latest user documentation for RUGGEDCOM ROX II v2.9 is available online at
www.siemens.com/ruggedcom. To request or inquire about a user document, contact Siemens Customer
Support.
xxxvi
Description
Commands are in bold.
Parameters are in plain text.
Parameters are listed in the order they must be entered.
Parameters in italics must be replaced with a user-defined value.
Alternative parameters are separated by a vertical bar (|).
Square brackets indicate a required choice between two or more
parameters.
Curly brackets indicate an optional parameter(s).
All commands and parameters are presented in the order they must
be entered.
RUGGEDCOM ROX II
CLI User Guide
Related Documents