Siemens RUGGEDCOM ROX II User Manual page 86

Chapter 2
Using RUGGEDCOM ROX II
documented. Misuse of the commands available in this mode can corrupt the operational state of the
device and render it inaccessible.
IMPORTANT!
Changes made to the configuration in this mode will override the current configuration settings (e.g. IP
addresses, VLAN settings, etc.), but are discarded following a system reboot.
In normal mode, type maint-login and press Enter. A password prompt appears.
1.
NOTE
The current maintenance mode password/passphrase is the same as the password/passphrase
for accessing service mode.
2. Type the current maintenance mode password/passphrase and press Enter.
Example:
ruggedcom# maint-login
Password:
Welcome to ruggedcom Partition2 (Rev ROX 2.4.0 (2013-01-24 18:20)) RX1511 SN R15R-3410-PR061
22:29:20 up 1 day,
Temperature +41.0 C (+105.8 F)
root@ruggedcom:~#
48
8:42
Disk 25% Memory 43%
RUGGEDCOM ROX II
CLI User Guide
Accessing Maintenance Mode