Managing Ip Pools; Viewing A List Of Ip Pools; Adding An Ip Pool - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
Section 5.15.13

Managing IP Pools

The following sections describe how to configure and manage IP pools for DHCP subnets:
• Section 5.15.13.1, "Viewing a List of IP Pools"
• Section 5.15.13.2, "Adding an IP Pool"
• Section 5.15.13.3, "Deleting an IP Pool"
Section 5.15.13.1

Viewing a List of IP Pools

To view a list of IP pools configured for a DHCP subnet, type:
show running-config services dhcpserver subnet name options ippool
Where:
• name is the name of the subnet
If pools have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services dhcpserver subnet Local options ippool
services
dhcpserver
subnet Local
options
ippool pool1
no unknown-client
iprange 172.0.0.0
end 172.0.0.1
!
option82 class1
remote-id
circuit-id 00:00:00:01:01:01
!
!
!
!
!
!
If no IP pools have been configured, add pools as needed. For more information, refer to
"Adding an IP Pool".
Section 5.15.13.2

Adding an IP Pool

To add an IP pool to a DHCP subnet, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the pool by typing:
services dhcpserver subnet name options ippool description
Where:
258
00:00:00:01:03:01
RUGGEDCOM ROX II
CLI User Guide
Section 5.15.13.2,
Managing IP Pools