Documentation References; Introduction To The Documentation; On Configuring, Commissioning And Using The Cp - Siemens SIMATIC NET S7-400 Manual

Documentation references

B.1

Introduction to the documentation

Where to find Siemens documentation
● Article numbers
You will find the article numbers for the Siemens products of relevance here in the
following catalogs:
– SIMATIC NET - Industrial Communication / Industrial Identification, catalog IK PI
– SIMATIC - Products for Totally Integrated Automation and Micro Automation, catalog
You can request the catalogs and additional information from your Siemens
representative. You will also find the product information in the Siemens Industry Mall at
the following address:
Link: (https://mall.industry.siemens.com)
● Manuals on the Internet
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online
Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15247/man)
Go to the required product in the product tree and make the following settings:
Entry type "Manuals"
● Manuals on the data medium
You will find manuals of SIMATIC NET products on the data medium that ships with many
of the SIMATIC NET products.
B.2

On configuring, commissioning and using the CP

B.2.1 /1/
SIMATIC NET
S7 CPs for Industrial Ethernet
Configuring and Commissioning - configuration manual
manual Part A - General Applications
Siemens AG
Link: (https://support.industry.siemens.com/cs/ww/en/view/30374198)
CP 443-1 RNA
Manual, 03/2019, C79000-G8976-C299-04
ST 70
B
67