Ordering Supplies; Fixing A Paper/Material Jam; Restoring The Factory Settings - Kodak VERITE Craft 6 Extended User Manual

Ordering supplies

If you would like to purchase consumable material, visit the following
website at www.kodakverite.com
Ordering ink cartridges
Product Name
KODAK VERITÉ 5 Standard Black Ink
Cartridge
KODAK VERITÉ 5 Standard Color Ink
Cartridge
KODAK VERITÉ 5 XL Black Ink
Cartridge
KODAK VERITÉ 5 XL Color Ink
Cartridge
KODAK VERITÉ 5 XXL Black Ink
Cartridge
KODAK VERITÉ 5 XXL Color Ink
Cartridge
KODAK VERITÉ 5 3XL Black Ink
Cartridge
KODAK VERITÉ 5 3XL Color Ink
Cartridge
KODAK VERITÉ 5 XL Combo Ink
Cartridge
KODAK VERITÉ 5 3XL Combo Ink
Cartridge
Ink page yield values for color graphics and text document obtained
by continuous printing in accordance with ISO/IEC 24711.
Actual results may vary.
Note(s)
For page yield information, visit
●
www.kodakverite.com/support
The cartridges used for printing documents can also be
●
used for printing photos.
For best results, use only genuine KODAK VERITÉ Ink
●
Cartridges.
Using genuine KODAK VERITÉ Ink Cartridges
KODAK VERITÉ Ink Cartridges are designed to perform for superior
print quality, and our inks are formulated to work with the unit and
help extend the life of your product.
We recommend that you use only genuine KODAK VERITÉ Ink
Cartridges sold by Funai Corporation, Inc.
Funai's warranty does not cover damage caused by non-KODAK
VERITÉ Ink or Ink Cartridges.
English
Ink Page Yield
~200 pages
~180 pages
~400 pages
~360 pages
~600 pages
~500 pages
~1200 pages
~1080 pages
Black: ~400 pages/
Color: ~360 pages
Black: ~1200 pages/
Color: ~1080 pages

Fixing a paper/material jam

Clearing paper/material jam in the unit
Note(s)
The Parts inside the unit are Sensitive. Avoid unnecessarily
●
touching Parts while Clearing Jams.
1
If needed close the Exit Tray Extender and then the Paper
Exit Tray all the way into the unit.
2
Check the Top tray or carefully fully-open the front cover to
access the jammed paper/material. See 1 below.
3
Firmly grasp both sides of the paper/material, then gently
pull it out.
Note(s)
Be careful not to tear the paper/material while removing it.
●
4
Press to cancel the rest of the print job.
CAUTION
DO NOT insert a material or paper into the Rear tray
●
when you print on Top tray paper. In this case, remove
the material and press

Restoring the factory settings

You can restore the default settings on the unit using the web
interface or Control panel.
» Refer to "Device Configuration" on page 63.
» Refer to "Restore Factory Default" on page 60.
68
to cancel.
Continued on next page.