Connecting To A Computer - Kodak EasyShare 4000 User Manual

Connecting to a Computer

A USB cable is required to connect to a computer. Use the USB cable that came
with your Kodak EasyShare camera. To purchase one separately, see a retail
dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION:
Make sure your camera is NOT in the printer dock when
you are connecting to the computer.
1
Make sure the power is connected to the printer dock (see
Power, page 5), and the Kodak EasyShare printer dock software is installed
on the computer (see
Chapter 4
Installing the Software, page
2
Plug the labeled
the labeled USB port on your computer. See
your computer documentation for details.
3
Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
Connecting the
21).
end of a USB cable into
25