Connecting To A Computer - Kodak EasyShare Printer Dock Plus Series 3 User Manual

Connecting to a computer

IMPORTANT: Make sure your camera is NOT docked when you connect the printer dock
to the computer.
www.kodak.com/go/support
Using your printer dock with a computer
1 Make sure Kodak EasyShare software is installed on
the computer (see
2 Plug the labeled
into the labeled USB port on your computer.
See your computer documentation for details.
3 Plug the other end of the USB cable into the USB
connector on the back of the printer dock.
On Windows operating systems, the first time the
printer dock is connected, the new hardware wizard
runs. If prompted, follow the instructions on the
screen.
See your computer documentation for details.
NOTE: If a Kodak Wi-Fi
time the printer dock is connected, the Add Wireless Printer
Assistant may appear. Follow the instructions on the screen.
page 22).
end of the included USB cable
®
card (sold separately) is inserted the first
24