6.
To execute, use the
[2] knob
the
[ENTER]
button.
When the backup is finished, the screen indicates
If a file of the same name exists, a confirmation screen (Overwrite?)
asks whether you want to overwrite the existing file.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
"Executing..."
Restoring backup data
(RESTORE)
Here's how user data that you backed-up on a USB flash drive can be
returned to the JUPITER-X. This operation is called "restore".
NOTE
5 All user data are rewritten when you execute the restore operation. If your
JUPITER-X contains important data, assign it a different name and back it
up to an USB flash drive before you restore.
1.
Press the
[MENU]
button.
2.
Use the
[1] knob
to select "UTILITY", and then press the
[ENTER]
button.
You can also make this selection by using the
instead of the
[1]
knob.
3.
Use the
[1] knob
to select "RESTORE", and then press the
[ENTER]
button.
4.
Use the
[1] knob
to select the file that you want to restore.
5.
Press the
[ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the
6.
To execute, use the
[2] knob
the
[ENTER]
button.
When the restore operation is finished, the screen indicates
"Completed. Turn off
power".
7.
Turn the power of the JUPITER-X off and then on again.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
"Executing..."
Import/Export
Importing tones
Tones that you download or tones that you exported from another
unit can be imported into the JUPITER-X as added tones.
Here we explain how to import an SVZ file that you prepared using the
export function of another device.
* You can also import tones from models. When you import a tone that
does not belong to a model, the model name is saved as
1.
Save the SVZ file containing the tones to be imported in
the ROLAND/SOUND folder of your USB flash drive, and
connect it to the JUPITER-X.
2.
Press the
[MENU]
button.
3.
Use the
[1] knob
to select "UTILITY", and then press the
[ENTER]
button.
You can also make this selection by using the
instead of the
[1]
knobs.
4.
Use the
[1] knob
to select "IMPORT/EXPORT", and then
press the
[ENTER]
button.
5.
Use the
[1] knob
to select
the
[ENTER]
button.
6.
Use the
[1] knob
to select the file that contains the tone(s)
that you want to import, and then press the
button.
to select "OK", and then press
"Completed!"
display is shown.
PAGE [ ] [ ] buttons
[EXIT]
button.
to select "OK", and then press
display is shown.
"NO
ASSIGN".
PAGE [ä] [å] buttons
"IMPORT
TONE", and then press
PAGE [>]
JUPITER-X Owner's Manual Ver. 3.0 and later
7.
Use the
[1] knob
to select the tone that you want to import,
and then use the
[2] knob
8.
Press the
PAGE [>]
button.
9.
Use the
[1] knob
to select the import-destination tone, and
then press the
[ENTER] button
* Be aware that the import-destination tone you select will be overwritten.
* If there is a tone named
"INIT
import-destination tone (a check mark is added automatically). If you
want to keep that tone, clear the check mark.
10.
Press the
PAGE [>]
button.
11.
To execute, use the
[2] knob
the
[ENTER]
button.
When import is completed, the message
appears.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
"Executing..."
Importing scenes
You can import scenes into the JUPITER-X as additional scenes that
were exported from the JUPITER-X/Xm.
* You can also import scenes from a backup file.
1.
Save the SVD file for the scene you wish to import to the
"ROLAND/SOUND"
folder of a USB flash drive, and connect
the USB flash drive to the JUPITER-X.
2.
Press the
[MENU]
button.
3.
Use the
[1] knob
to select "UTILITY", and then press the
[ENTER]
button.
You can also make this selection by using the
instead of the
[1]
knobs.
4.
Use the
[1] knob
to select
the
[ENTER]
button.
5.
Use the
[1] knob
to select
the
[ENTER]
button.
6.
Use the
[1] knob
to select the file containing the scene you
wish to import, and press the
7.
Use the
[1] knob
to select the scene you wish to import, and
use the
[2] knob
to select it with a check mark.
8.
Press the
PAGE [>]
button.
9.
Use the
[1] knob
to select where to import the scene, and
press the
[ENTER] button
* Use caution, as this overwrites the scene that's already in the import
destination.
* If a scene named
"INIT SCENE"
as the import destination scene with a check mark. To leave the scene
as-is, clear the check mark.
10.
Press the
PAGE [>]
button.
11.
To execute, use the
[2] knob
the
[ENTER]
button.
When importing, the scene is saved with the name
The
display
shows
"Import Scene Completed!"
done.
* If a user tone is being used by the scene of the import destination, you
can select whether to import that user tone as well.
* Never turn off the power or disconnect the USB flash drive during a
process, such as while the
"Executing..."
to add a check mark.
to add a check mark.
TONE", it is automatically selected as the
to select "OK", and then press
"Import Tone Completed!"
display is shown.
PAGE [ä] [å] buttons
"IMPORT/
EXPORT", and then press
"IMPORT
SCENE", and then press
PAGE [>]
button.
to select it with a check mark.
already exists, this is automatically selected
to select "OK", and then press
"INIT
SCENE".
when importing is
display is shown.
25