Interface Configuration - Kyocera Mita C2525E Advanced Operation Manual

Interface Configuration

This device includes as standard equipment a parallel interface, a USB interface, and a network
interface. An optional serial interface or network interface can be installed as needed.
Emulation and font environments may
be set individually for each of these
interfaces.
NOTE: Selection of the interface tab does not specify which interface is used for receiving data. The
interface is automatically selected when receiving data.
Parallel Interface Mode Configuration
The parallel port interface supports bidirectional communication and high-speed mode. For normal
usage, leave the default setting as [Auto].
Mode
Auto
Normal
High Speed
Nibble (High)
NOTE: Use a parallel interface cable compliant with the IEEE1284 specification.
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Interface].
4 Press [Parallel] and press [Change #].
5 Select the desired mode.
6 Press [Close]. The display is returned to the Printer menu screen.
Interface
Setting Item
Send & receive mode
Parallel Network
Printer menu
Description
Automatically switches the mode to match the connected
computer. For normal usage, there is no need to change this
setting.
Perform standard communication over the Centronics interface.
Data can be transferred between this device and the computer in
high speed mode. (Select this mode if data is not correctly printed
when the copier is connected to a workstation)
Sends and receives data in a high speed mode compliant with
IEEE1284 specification.
Select item.
Printer menu
Print Sta-
Font
tus Page
Interface Page Set
Print
Emulation
Quality
Printer Settings
Value
Auto
Change #
USB Serial Option
Paper
Others
Handling
Color Mode
RAM DISK
Mode
3-5