Interface Block Setting - Kyocera FS-1028MFP Operation Manual

Default Setting (System Menu)

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
8-146
Downloaded From ManualsPrinter.com Manuals
Sys. Menu/Count.:a b
1 Report
2 Counter
3
********************* System
[ Exit
Login User Name:
*******************
Login Password:
[ Menu ] [ Login
System:
1 Network Setting
2 I/F Block Set.
*********************
3 Security Level
[ Exit
I/F Block Set.:
1 USB Host
*********************
2 USB Device
3 Option I/F
[ Exit
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
]
When you are performing user management and
L b
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
a b
]
3
Press the
4
Press the OK key. The I/F Block Set. menu
a b
appears.
]
5
Press the
or key to select [I/F Block Set.].
or key to select [USB Host].
OPERATION GUIDE
or