ABB +N5600 Firmware Instructions page 78

78 Program features
With ACS880 single drives with a separate supply unit, the basic communication is
initialized by parameter
visible (see below).
If the supply unit is regenerative (such as an IGBT supply unit), it is possible to send
a DC voltage and/or reactive power reference to it from inverter parameter group
LSU control. A regenerative supply unit will also send actual signals to the inverter
unit which are visible in parameter group
Settings
• Parameters 01.102...01.164
06.36...06.43 (page 165),
180), 30.101...30.149
word 1 (page 473) and
• Parameter groups
transmit data (page 406),
control (page 472).
95.20 HW options word
(page 152),
06.116...06.118
(page 294), 31.120...31.121
96.108 LSU control board boot
60 DDCS communication
62 D2D and DDCS receive data
1. This will make several parameters
01 Actual values.
05.111...05.121
(page 165), 07.106...07.107
(page 302),
(page 479).
(page 393),
(page 164),
(page
95.20 HW options
61 D2D and DDCS
(page 410) and 94 LSU
94