ABB +N5600 Firmware Instructions page 401

No. Name/Value
60.32 M/F comm
supervision force
Bit Name
0 Ext 1
1 Ext 2
2 Local
3...15 Reserved
0000b...0111b
60.41 Extension adapter
com port
No connect
Slot 1A
Slot 2A
Slot 3A
Slot 1B
Slot 2B
Slot 3B
RDCO CH 3
60.50 DDCS controller
drive type
ABB engineered
drive
ABB standard drive
60.51 DDCS controller
comm port
Not in use
Slot 1A
Slot 2A
Slot 3A
Slot 1B
Slot 2B
Slot 3B
RDCO CH 0
XD2D
Description
Activates master/follower communication monitoring
separately for each control location (see section
vs. external control on page 24).
The parameter is primarily intended for monitoring the
communication with master or follower when it is connected
to the application program and not selected as a control
source by drive parameters.
Value
1 = Communication monitoring active when Ext 1 is being used.
1 = Communication monitoring active when Ext 2 is being used.
1 = Communication monitoring active when local control is being
used.
Master/follower communication monitoring selection.
Selects the channel used for connecting an optional FEA-xx
extension adapter.
None (communication disabled).
Channel A on FDCO module in slot 1.
Channel A on FDCO module in slot 2.
Channel A on FDCO module in slot 3.
Channel B on FDCO module in slot 1.
Channel B on FDCO module in slot 2.
Channel B on FDCO module in slot 3.
Channel CH 3 on RDCO module (with BCU control unit only). 13
In ModuleBus communication, defines whether the drive is of
the "engineered" or "standard" type.
The drive is an "engineered drive" (data sets 10...25 are
used).
The drive is a "standard drive" (data sets 1...4 are used).
Selects the DDCS channel used for connecting an external
controller (such as an AC 800M).
None (communication disabled).
Channel A on FDCO module in slot 1.
Channel A on FDCO module in slot 2.
Channel A on FDCO module in slot 3.
Channel B on FDCO module in slot 1.
Channel B on FDCO module in slot 2.
Channel B on FDCO module in slot 3.
Channel 0 on RDCO module (with BCU control unit only).
Connector XD2D.
Parameters 401
Def/FbEq16
0000b
Local control
1 = 1
No connect
0
1
2
3
4
5
6
ABB
engineered
drive
0
1
Not in use
0
1
2
3
4
5
6
10
7