ABB +N5600 Firmware Instructions page 414

414 Parameters
No. Name/Value
62.38 M/F communication
status 2
Bit Name
0 Follower 17
1 Follower 18
... ...
15 Follower 32
0000h...FFFFh
62.41 M/F follower ready
status 1
Bit Name
0 Follower 1
1 Follower 2
... ...
15 Follower 16
0000h...FFFFh
62.42 M/F follower ready
status 2
Bit Name
0 Follower 17
1 Follower 18
... ...
15 Follower 32
0000h...FFFFh
62.45 Data set 1 data 1
selection
None
CW 16bit
Ref1 16bit
Ref2 16bit
Description
In the master, displays the status of the communication with
followers specified by parameter
supervision sel 2.
Description
1 = Communication with follower 17 OK.
1 = Communication with follower 18 OK.
...
1 = Communication with follower 32 OK.
M/F communication status (followers 17...32).
In the master, displays the ready status of the communication
with followers specified by parameter
supervision sel 1.
Description
1 = Follower 1 ready.
1 = Follower 2 ready.
...
1 = Follower 16 ready.
Follower 1...16 ready status.
In the master, displays the ready status of the communication
with followers specified by parameter
supervision sel 2.
Description
1 = Follower 17 ready.
1 = Follower 18 ready.
...
1 = Follower 32 ready.
Follower 17...32 ready status.
Parameters 62.45...62.50
received in data sets 1 and 3 from the external controller.
These data sets are used in ModuleBus communication with
a "standard drive" (60.50 DDCS controller drive type
standard drive).
Parameters 62.95...62.100
external controller in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of
data set 1. Parameter 62.95 Data set 1 data 1 value
the received data in integer format, and can also be used as a
source by other parameters.
None.
Control Word (16 bits)
Reference REF1 (16 bits)
Reference REF2 (16 bits)
60.20 M/F comm
60.23 M/F status
60.24 M/F status
define a target for the data
display the data received from the
Def/FbEq16
-
1 = 1
-
1 = 1
-
1 = 1
None
= ABB
displays
0
1
2
3