Contents of the manual
This manual contains the following chapters:
•
Using the control panel
•
Control locations and operating modes
operating modes of the drive.
•
Quick start-up guide
additional alternative checklists for starting up the drive with the control program.
•
ESP program features
application.
•
Program features
the program features that are not specific to ESP applications.
•
Application macros
connection diagram. Macros are pre-defined applications which will save the user
time when configuring the drive.
•
Parameters
describes the parameters used to program the drive.
•
Additional parameter data
•
Fault tracing
lists the warning and fault messages with possible causes and
remedies.
•
Fieldbus control through the embedded fieldbus interface (EFB)
communication to and from a fieldbus network using the embedded fieldbus
interface of the drive.
•
Fieldbus control through a fieldbus adapter
from a fieldbus network using an optional fieldbus adapter module.
•
Control chain diagrams
Related documents
A list of related manuals is printed on the inside of the front cover.
provides basic instructions for the use of the control panel.
contains the basic start-up sequence of the drive and
describes the program features specific to the ESP
describes the control locations and operation modes, as well as
contains a short description of each macro together with a
contains further information on the parameters.
showing the parameter structure within the drive.
Introduction to the manual 15
describes the control locations and
describes the communication to and
describes the