ABB +N5600 Firmware Instructions page 199

No. Name/Value
12.19 AI1 scaled at AI1
min
-32768.000 ...
32767.000
12.20 AI1 scaled at AI1
max
-32768.000 ...
32767.000
12.21 AI2 actual value
-22.000 ... 22.000
mA or V
12.22 AI2 scaled value
-32768.000 ...
32767.000
12.25 AI2 unit selection
V
mA
12.26 AI2 filter time
0.000 ... 30.000 s
Description
Defines the real internal value that corresponds to the
minimum analog input AI1 value defined by parameter
AI1 min. (Changing the polarity settings of
can effectively invert the analog input.)
AI
scaled
12.20
12.17
Real value corresponding to minimum AI1 value.
Defines the real internal value that corresponds to the
maximum analog input AI1 value defined by parameter
AI1 max. See the drawing at parameter
AI1 min.
Real value corresponding to maximum AI1 value.
Displays the value of analog input AI2 in mA or V (depending
on whether the input is set to current or voltage by a hardware
setting).
This parameter is read-only.
Value of analog input AI2.
Displays the value of analog input AI2 after scaling. See
parameters 12.29 AI2 scaled at AI2 min
at AI2 max.
This parameter is read-only.
Scaled value of analog input AI2.
Selects the unit for readings and settings related to analog
input AI2.
Note: This setting must match the corresponding hardware
setting on the drive control unit (see the hardware manual of
the drive). Control board reboot (either by cycling the power
or through parameter 96.08 Control board
validate any changes in the hardware settings.
Volts.
Milliamperes.
Defines the filter time constant for analog input AI2. See
parameter 12.16 AI1 filter
Filter time constant.
12.19 and
(12.12)
12.18
12.19
12.19 AI1 scaled at
and 12.30 AI2 scaled
boot) is required to
time.
Parameters 199
Def/FbEq16
0.000
12.17
12.20
AI (12.11)
in
1 = 1
50.0
12.18
1 = 1
-
1000 = 1 mA
or V
-
1 = 1
mA
2
10
0.100 s
1000 = 1 s