Standard Di, Ro - ABB +N5600 Firmware Instructions

184 Parameters
No. Name/Value
-600.00...600.00 Hz ESP frequency.
09.22 Speed reference %
-1200.00
...1200.00 %
09.23 Speed reference
used
-30000.0...
30000.0 rpm
09.41 Restart delay
remaining
0.0...30000.0 min
09.48 ON-time remaining
0.0...30000.0 min
09.49 OFF-time remaining
0.0...30000.0 min
10

10 Standard DI, RO

10.01 DI status
0000h...FFFFh
10.02 DI delayed status
0000h...FFFFh
Description
Displays ESP speed/frequency reference in percent scale.
Speed reference.
Displays the speed reference currently produced by the ESP
control program.
Speed reference.
Displays the time remaining before restart delay function
stops inhibiting the user start command.
Restart delay time.
Displays the time remaining before ON-cycle is complete.
This is valid only when time control function is active.
Remaining ON time in minutes.
Displays the time remaining before OFF-cycle is complete.
This is valid only when time control function is active.
Remaining OFF time in minutes.
Configuration of digital inputs and relay outputs.
Displays the electrical status of digital inputs DIIL and
DI6...DI1. The activation/deactivation delays of the inputs (if
any are specified) are ignored. A filtering time can be defined
by parameter 10.51 DI filter
Bits 0...5 reflect the status of DI1...DI6; bit 15 reflects the
status of the DIIL input. Example: 1000000000010011b =
DIIL, DI5, DI2 and DI1 are on, DI3, DI4 and DI6 are off.
This parameter is read-only.
Status of digital inputs.
Displays the status of digital inputs DIIL and DI6...DI1. This
word is updated only after activation/deactivation delays (if
any are specified).
Bits 0...5 reflect the delayed status of DI1...DI6; bit 15
reflects the delayed status of the DIIL input.
This parameter is read-only.
Delayed status of digital inputs.
time.
Def/FbEq16
10 = 1Hz
0.00
10 = 1%
0.0
10 = 1rpm
0.0
10 = 1min
0.0
10 = 1min
0.0
10 = 1min
-
1 = 1
-
1 = 1