Quick Start-Up Guide; Contents Of This Chapter; Before You Start; Safety - ABB +N5600 Firmware Instructions

Quick start-up guide

Contents of this chapter

This chapter contains the basic start-up sequence of the drive and additional
alternative checklists for starting up the drive with the ESP control program.
In this chapter, the drive is set up using ACS-AP-I control panel. You can also do the
start-up sequence using the Drive composer PC tool.

Before you start

Make sure that the drive has been mechanically and electrically installed as
described in the appropriate Quick installation guide and/or Hardware manual.

Safety

WARNING! All electrical installation and maintenance work on the drive should
be carried out by qualified electricians only.
Never work on the drive, the brake chopper circuit, the motor cable or the motor when
power is applied to the drive. Always make sure by measuring that no voltage is
actually present.
Quick start-up guide 29
4