Frequency Reference Chain - ABB +N5600 Firmware Instructions

No. Name/Value
26.74 Torque ref ramp out
-1600.0 ... 1600.0% Torque reference after limiting and ramping.
26.75 Torque reference
act 5
-1600.0 ... 1600.0% Torque reference after control mode selection.
26.76 Torque reference
act 6
-1600.0 ... 1600.0% Torque reference after application of reference additive 2.
26.77 Torque ref add A
actual
-1600.0 ... 1600.0% Torque reference additive 2.
26.78 Torque ref add B
actual
-1600.0 ... 1600.0% Torque reference additive 2.
26.81 Rush control gain
0.0 ...10000.0
26.82 Rush control
integration time
0.0 ... 10.0 s
28
28 Frequency reference
chain
28.01 Frequency ref ramp
input
-500.00 ... 500.00
Hz
28.02 Frequency ref ramp
output
-500.00 ... 500.00
Hz
Description
Displays the torque reference after limiting and ramping. See
the control chain diagram on page 651.
This parameter is read-only.
Displays the torque reference after control mode selection.
See the control chain diagram on page 653.
This parameter is read-only.
Displays the torque reference after application of reference
additive 2. See the control chain diagram on page 653.
This parameter is read-only.
Displays the value of the source of torque reference additive
2. See the control chain diagram on page 653.
This parameter is read-only.
Displays the value of torque reference additive 2 before it is
added to torque reference. See the control chain diagram on
page 653.
This parameter is read-only.
Rush controller gain term. See section
85).
Rush controller gain (0.0 = disabled).
Rush controller integration time term.
Rush controller integration time (0.0 = disabled).
Settings for the frequency reference chain.
See the control chain diagrams on pages
Displays the used frequency reference before ramping. See
the control chain diagram on page 657.
This parameter is read-only.
Frequency reference before ramping.
Displays the final frequency reference (after selection,
limitation and ramping). See the control chain diagram on
page 657.
This parameter is read-only.
Final frequency reference.
Parameters 285
Rush control (page
656 and 657.
Def/FbEq16
-
See par.
46.03
-
See par.
46.03
-
See par.
46.03
-
See par.
46.03
-
See par.
46.03
10.0
1 = 1
2.0 s
1 = 1 s
-
See par.
46.02
-
See par.
46.02