Esp Production Mode; Manual Mode - ABB +N5600 Firmware Instructions

ESP production mode

The ESP control program can be used to control motor speed using Manual mode
and Automatic process control mode.


Manual mode

In manual mode, the drive will control motor speed with user defined
acceleration/deceleration ramp rates. Typically, it is desired to accelerate to the
desired production speed range as soon as possible and then switch to a smoother
speed transition style. Specifically for that purpose, the ESP control program provides
two sets of acceleration/deceleration ramp time settings.
You can set the speed reference directly through a desired control interface.
• Analog input
• Fieldbus
• Control panel, and
• Drive parameter value.
Speed reference
75.11 Pump
speed ref
source
75.23 Ramp
switch speed
75.15 Starting
speed
Used ramp time
75.21
Acceleration
time
Used ramp time
75.24
Acceleration
time 2
ESP program features 49
Used ramp time
Used ramp time
75.25
75.22
Deceleration
Deceleration
time 2 time
Time