Application Macros; What This Chapter Contains; General - ABB +N5600 Firmware Instructions

Application macros 131

7
Application macros

What this chapter contains

This chapter describes the intended use, operation and default control connections of
the application macros.
More information on the connectivity of the control unit is given in the Hardware
manual of the drive.

General

Application macros are sets of default parameter values suitable for the application in
question. When starting up the drive, the user typically selects the best-suited
application macro as a starting point, then makes any necessary changes to tailor the
settings to the application. This usually results in a much lower number of user edits
compared to the traditional way of programming a drive.
Application macros can be selected by parameter 96.04 Macro select. User
parameter sets are managed by the parameters in group 96 System.