Exception Codes - ABB +N5600 Firmware Instructions

626 Fieldbus control through the embedded fieldbus interface (EFB)
Code Function name
2Bh / 0Eh Encapsulated Interface
Transport

Exception codes

The table below shows the Modbus exception codes supported by the embedded
fieldbus interface.
Code Name
01h ILLEGAL FUNCTION
02h ILLEGAL DATA
ADDRESS
03h ILLEGAL DATA VALUE
04h SLAVE DEVICE
FAILURE
06h SLAVE DEVICE BUSY
Description
Supported subcodes:
• 0Eh Read Device Identification: Allows reading the
identification and other information.
Supported ID codes (access type):
• 00h: Request to get the basic device identification
(stream access)
• 04h: Request to get one specific identification
object (individual access)
Supported Object IDs:
• 00h: Vendor Name ("ABB")
• 01h: Product Code (for example, "AINFX")
• 02h: Major Minor Revision (combination of contents
of parameters 07.05 Firmware version
Protocol ID).
• 03h: Vendor URL ("www.abb.com")
• 04h: Product name (for example, "ACS880")
Description
The function code received in the query is not an
allowable action for the server.
The data address received in the query is not an
allowable address for the server.
The requested Quantity of Registers is larger than the
drive can handle.
Note: This error does not mean that a value written to
a drive parameter is outside the valid range.
The value written to a drive parameter is outside the
valid range. See section
registers 400090...400100)
The server is engaged in processing a long-duration
program command.
and
Error code registers (holding
on page 630.
58.02