ABB +N5600 Firmware Instructions page 32

32 Quick start-up guide
Set the correct date:
• Use and
and right.
• Use and
• Press (Save) to accept the new
setting.
Check/adjust all the remaining settings in the
Date & time menu.
The Show clock setting determines whether
the time is shown at all times in the bottom
pane of the display.
After you have made the settings, press
(Back or Exit) repeatedly until the
Home view (right) reappears.
Switch to local control to ensure that external
control is disabled by pressing the
key. Local control is indicated by the text
"Local" in the top pane.
Open the main Menu by pressing
(Menu).
to move the cursor left
to change the value.
2 – Electrical settings
Loc/Rem
Remote
Motor speed used
rpm
Motor current
A
Motor torque%
%
Options 12:35
Local
Motor speed used
rpm
Motor current
A
Motor torque%
%
Options 12:36
Local
Menu
Parameters
Assistants
Energy efficiency
Event log
Exit 12:36
0.0 rpm
0.00
0.00
0.0
Menu
0.0 rpm
0.00
0.00
0.0
Menu
0.0 rpm
Select