Fault Functions - ABB +N5600 Firmware Instructions

302 Parameters
No. Name/Value
30.104 LSU limit word 4
Bit Name
0 Udc ref max
1 Udc ref min
2 User I max
3 Temp I max
4...15 Reserved
0000h...FFFFh
30.148 LSU minimum
power limit
-200.0 ... 0.0%
30.149 LSU maximum
power limit
0.0 ... 200.0%
31

31 Fault functions

31.01 External event 1
source
Active (false)
Inactive (true)
DIIL
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
31.02 External event 1
type
Fault
Warning
Description
(Only visible when IGBT supply unit control activated by
95.20)
Displays limit word 4 of the supply unit.
This parameter is read-only.
Description
1 = DC reference is being limited by supply control program
parameters
1 = Current is being limited by supply control program parameters
1 = Current is being limited based on temperature
Supply unit limit word 4.
(Only visible when IGBT supply unit control activated by
95.20)
Defines a minimum power limit for the supply unit.
Negative values refer to regenerating, ie. feeding power into
the supply network.
Minimum power limit for supply unit.
(Only visible when IGBT supply unit control activated by
95.20)
Defines a maximum power limit for the supply unit.
Maximum power limit for supply unit.
Configuration of external events; selection of behavior of the
drive upon fault situations.
Defines the source of external event 1.
See also parameter 31.02 External event 1
0 = Trigger event
1 = Normal operation
0.
1.
DIIL input (10.02 DI delayed
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
Selects the type of external event 1.
The external event generates a fault.
The external event generates a warning.
type.
status, bit 15).
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 148). -
Def/FbEq16
-
1 = 1
-130.0%
1 = 1%
130.0%
1 = 1%
Inactive
(true); DI6
(95.20 b8)
0
1
2
3
4
5
6
7
8
11
12
Fault
(95.20 b8)
0
1