ABB +N5600 Firmware Instructions page 250

250 Parameters
No. Name/Value
PID
Control panel (ref
saved)
Control panel (ref
copied)
Other
22.12 Speed ref2 source
22.13 Speed ref1 function
Ref1
Add (ref1 + ref2)
Sub (ref1 - ref2)
Mul (ref1 × ref2)
Min (ref1, ref2)
Max (ref1, ref2)
22.14 Speed ref1/2
selection
Speed reference 1
Speed reference 2
Follow Ext1/Ext2
selection
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
Description
40.01 Process PID output actual
controller).
Control panel reference, with initial value from last-used panel
reference. See section Using the control panel as an external
control source (page 25).
Control panel reference, with initial value from previous
source or actual value. See section
an external control source
Source selection (see Terms and abbreviations
Selects speed reference source 2.
For the selections, and a diagram of reference source
selection, see parameter
Selects a mathematical function between the reference
sources selected by parameters
22.12 Speed ref2 source. See diagram at
source.
Signal selected by 22.11 Speed ref1 source
reference 1 as such (no function applied).
The sum of the reference sources is used as speed reference
1.
The subtraction ([22.11 Speed ref1
ref2 source]) of the reference sources is used as speed
reference 1.
The multiplication of the reference sources is used as speed
reference 1.
The smaller of the reference sources is used as speed
reference 1.
The greater of the reference sources is used as speed
reference 1.
Configures the selection between speed references 1 and 2.
See diagram at 22.11 Speed ref1
0 = Speed reference 1
1 = Speed reference 2
0.
1.
Speed reference 1 is used when external control location
EXT1 is active. Speed reference 2 is used when external
control location EXT2 is active.
See also parameter 19.11 Ext1/Ext2
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
(output of the process PID
Using the control panel as
(page 25).
on page 148). -
22.11 Speed ref1 source.
22.11 Speed ref1 source
22.11 Speed ref1
is used as speed
source] - [22.12 Speed
source.
selection.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 148). -
Def/FbEq16
16
18
19
Zero
Ref1
and
0
1
2
3
4
5
Follow
Ext1/Ext2
selection
0
1
2
3
4
5
6
7
8
11
12