Configure Terminal - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
Syntax
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Parameter
line-number
all
forceful-clear
Result
The console session is closed.
Further notes
You show the logged-on users with the
3.1.4

configure terminal

Description
With this command, you change to the Global configuration mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
configure terminal
Result
You are now in the Global configuration mode.
The command prompt is as follows:
cli(config)#
70
Description
Number of the connection that will be
terminated
terminates all connections
closes a session that is not reacting
show users
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
2 ... 9
-
-
command.
Configuration Manual, 11/2015, C79000-G8976-C252-10