No Loopd Vlan Mode - Siemens SCALANCE XM-400 Configuration Manual

Result
The loop detection function is enabled for VLAN.
Further notes
You disable the function with the
You can display the status of this function and other information with the
command
12.3.2.4

no loopd vlan mode

Description
With this command, you disable the loop detection function for VLAN.
Requirement
● Loopd is activated
● You are in the Global configuration mode.
The command prompt is:
cli(config)#
Syntax
Call the command without parameters:
no loopd vlan mode
Result
The loop detection function is disabled for VLAN.
Further notes
You enable the function with the
You can display the status of this function and other information with the
command
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
no loopd vlan mode
command.
loopd vlan mode
Diagnostics
12.3 Loop detection
show loopd
show loopd
789