Protocol-Vlan - Siemens SCALANCE XM-400 Configuration Manual

Syntax
Call up the command with the following parameters:
no map protocol
{ip | novell | netbios | appletalk | other <aa:aa>}
enet-v2
The parameters have the following meaning:
Parameter
ip
novell
netbios
appletalk
other
enet-v2
Result
The protocol is removed from all protocol groups.
Further notes
You create the protocol group with the
You can display the status of this function and other information with the
protocols-group
6.1.2.5

protocol-vlan

Description
With this command, you enable the protocol-based classification on all interfaces.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
Description
Internet Protocol v4
Novell Netware protocol
Netbios via TCP/IP
Appletalk
Other protocol.
Frame structure is Ethernet II
map protocol
command.
Network structures
Range of values / note
HEX 08:00
HEX 81:38
HEX f0:f0
HEX 80:9b
enter the hexadecimal protocol
value.
other:
•
aa:aa
IPV6:
•
86:DD
LLDP:
•
88:CC
PTP IEEE1588:
•
EAP (802.1X):
•
-
command.
show vlan
6.1 VLAN
88:F7
88:8E
181