No Dot1X Guest-Vlan Vlan-Id; Dot1X Guest-Vlan Reset - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.7 Port Based Network Access Control
Syntax
Call up the command with the following parameters:
dot1x guest-vlan vlan-id <vlan-id (1 - 4096)>
The parameters have the following meaning:
Parameter
vlan
-
Result
The guest VLAN ID is assigned to the port.
11.7.3.4

no dot1x guest-vlan vlan-id

Description
With this command, the guest VLAN ID is reset to the default value 1.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no dot1x guest-vlan vlan-id
Result
The ID of the guest VLAN has the value 1.
11.7.3.5

dot1x guest-vlan reset

Description
This command removes MAC addresses from the guest VLAN. If you specify a MAC
address, only this MAC address is removed from the guest VLAN. If you use this command
without parameters, all MAC addresses are removed from the guest VLAN.
748
Description
Keyword for the VLAN ID
VLAN ID
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
-
1 - 4096
Configuration Manual, 11/2015, C79000-G8976-C252-10