Completion Of Command Entries; Abbreviated Notation Of Commands - Siemens SCALANCE XM-400 Configuration Manual

Industrial ethernet switches

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Completion of command entries

The command interpreter of the Command Line Interface supports you when you enter

As soon as the first characters of the command have been entered in the input line, the

system can complete the entry as long as the character string is unambiguous.

This can be repeated after entering further characters.

Enter the first characters of the command.

Press the tab key.

The command interpreter completes the input as long as the command is unambiguous.

If you enter a character string that cannot be completed to form a command, an error

message is displayed.

● The command is not unique:

● The command is unknown:

● The command is incomplete:

If the entry is not yet complete, enter further characters.

Repeat this if necessary until the command is complete and can execute.

The command interpreter of the Command Line Interface also detects commands if only the

first character of the command or its parts is entered.

This is only possible if all the parts of the abbreviated input can be assigned to exactly one

command or to the parts of the command.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 11/2015, C79000-G8976-C252-10

, you obtain a list of the possible commands.

command can be replaced by the expression

show event config

% Ambiguous Command

% Invalid Command

% Incomplete command

2.7 General CLI commands

Show Quick Links

Table of Contents

Scalance xr-500