Rmon Collection Stats; No Rmon Collection Stats - Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.5 RMON
12.5.3.1

rmon collection stats

Description
With this command, you start the recording of statistical data of an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
rmon collection stats <index (1-52)>[owner<ownername(127)>]
The parameters have the following meaning:
Parameter
index
owner
ownername
Result
The recording of statistical data is started.
Further notes
You can display the content of a recording with the
12.5.3.2

no rmon collection stats

Description
With this command, you end the recording of statistical data of an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
814
Description
Number of the recording
User to which the event is assigned
User name of the user
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Range of values / note
1 ... 52
-
max. 127 characters
show rmon statistics
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.