Accessories
8.10 Terminal cover
8.10
Terminal cover
Function
Terminal covers are used as touch protection for the MTSE with flat terminal.
If additional touch protection is required for the terminals (e.g. IP20 degree of protection from
the front), terminal covers can be used instead of phase barriers.
Phase barriers and terminal covers cannot be connected simultaneously.
Sizes and article numbers
The optionally available terminal covers are listed in the table below.
Suitable for trans-
fer switching
equipment in size
3
4
5
* Short version
108
Suitable for trans-
Position on trans-
fer switching
fer switching
equipment with
equipment
number of poles
3
Top, bottom
4
3
4
3
4
Article number
Required
packages
3KD9304-6
3KD9304-7 *
3KD9304-8
3KD9304-5 *
3KD9404-6
3KD9404-7 *
3KD9404-8
3KD9404-5 *
3KD9504-6
3KD9504-8
3KC0 manual transfer switching equipment
Manual, 09/2018, L1V30368969105-01
2