Layer 2 Management Protocols; Garp; The "Show" Commands; Show Forward-All - Siemens SCALANCE XM-400 Configuration Manual

Layer 2 management protocols

In this part, you will find sections relating to the topics GARP, GMRP, GVRP, IGMP/MLD
snooping and IGMP/MLD querying.
8.1

GARP

This section describes commands of the following protocols:
● GARP - Generic Attribute Registration Protocol
● GMRP - GARP Multicast Registration Protocol
● GVRP - GARP VLAN Registration Protocol
8.1.1

The "show" commands

This section describes commands with which you display various settings.
8.1.1.1

show forward-all

Description
With this command, you display the entries of the GMRP forward all table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show forward-all
Result
The entries of the GMRP forward all table are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
8
387