Security And Authentication; User Management; The "Show" Commands; Show Roles - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication

This part contains the sections that describe the access rights and authentication methods.
11.1

User management

This section describes commands for access as administrator and the configuration of the
authentication methods.
11.1.1

The "show" commands

This section describes commands with which you display various settings.
11.1.1.1

show roles

Description
This command shows the created roles.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show roles
Result
The created roles are shown.
Further notes
You create a role with the
You delete a role with the
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
command.
role
command.
no role
11
675