Changing Parameter Settings Or Values - YASKAWA L1000A Technical Manual

4.3 The Drive and Programming Modes

◆ Changing Parameter Settings or Values

This example explains changing C1-02 (Deceleration Ramp 1) from 1.50 seconds (default) to 2.50 seconds.
1. Turn on the power to the drive. The initial display appears.
2.
Press or until the Parameter Setting Mode screen appears.
3.
Press to enter the parameter menu tree.
4.
Press or to select the C parameter group.
5.
Press two times.
6.
Press or to select the parameter C1-02.
7.
Press to view the current setting value (1.5 s). The left most digit flashes.
8.
Press F1 , F2 or
left right
9.
Press and enter 0020.0.
10.
Press to confirm the change.
92
Step
until the desired number is selected. "1" flashes.
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Display/Result
- MODE - DRV Rdy
Speed Ref (OPR)
U1-01= 0.00%
U1-02= 0.00% RSEQ
U1-03= 0.00A LREF
FWD
- MODE - PRG
Programming
HELP FWD
DATA
-PRMSET- PRG
Initialization
A1-00= 0
Select Language
← →
FWD
-PRMSET- PRG
Basic Setup
C1-01 = 1.50 sec
Accel Ramp 1
FWD
-PRMSET- PRG
-PRMSET-
Accel/Decel
Accel Ramp 1
C1-01= 1.50 sec C1-01= 1.50 sec
(0.0~600.00)
Accel Ramp 1
"1.50 sec"
FWD
FWD
-PRMSET- PRG
Decel Ramp 1
C1-02= 1.50 sec
(0.0~600.00)
"1.50 sec"
FWD
-PRMSET- PRG
Decel Ramp 1
C1-02= 001.50 sec
(0.0~600.00)
"1.50 sec"
FWD
-PRMSET- PRG
Decel Ramp 1
C1-02=001.50 sec
(0.0~600.00)
"1.50 sec"
FWD
-PRMSET- PRG
Decel Ramp 1
C1-02=002.50 sec
(0.0~600.00)
"1.50 sec"
FWD
Entry Accepted
PRG